SORHEA SHOCK DETECTION G-FENCE 600

Shock detection system for fences

G-FENCE 600/600Z is a shock detection technology allows to detect any attempt of intrusion by analysing vibrations caused by the intruder on the support on which the detector is installed. G-FENCE 600/600Z provides high detection performance as able to detect any attempt of intrusion by analysing vibration caused by intruder.

Perimeter detection system
Up to 600m perimeter detection
Up to 10 detection zone (G-FENCE 600Z only)
Configure sensitivity on device
Detection/sensor : 3m width and 4m height panel

TECHNICAL CHARACTERISTICS

Power supply	12Vdc
Alarm output	2 intrusion alarms (1 per zone) and 1 technical alarm
Operating Temperature	From -35°C up to +70°C (from -31°F up to 158°F)
Electromagnetic compatibility	Compliance with European standards (label CE)
Installation	1 sensor per fence panel – up to 200m (656 ft) of addtionnal passive cable per cable start
Configuration	Auto-calibration – Sensitivity adjustment per sensor/zone at distance or locally without software
Remote maintenance	Integrated web server – Up to 1000 event log history

RECOMMENDATIONS FOR INSTALLATION
It is important to install a detector cable in the middle of the fence panel with the supplied cableties and to fix a sensor by tightening one of the cable ties on the fence mesh.
To optimise the sensor’s detection, the sensor must be placed in the middle of the panel.
Entrances and gates: use at least a 0.6mm² standard cross-section cable with a maximum length of 200 m per-entrance or gate.

Technology :To secure a fence and detect any intrusion attempt, a detector cable is installed on the fence. During an intrusion, the sensors will detect vibrations on the fence and send information to the Control Units, which in turn analyse the information received before triggering an alarm, or not.The cable is pre-assembled with easy-to-install sensors helping to reduce installation costs.